Danny (71.35.126.196) - Thu Oct 19 02:58:20 2006

I have a 1981 toyota 4+4 and i was wondering if i was to switch to four link front and rear where would i attach the links on the rear end and where on the frame? What kind of tubing should i use for the links?

Reply #1 Dave (68.105.65.165) - Mon Dec 24 01:52:57 2007

the two lowers would go from about 4 inches inside of the drums and they would go on the bottom of the frame about the point of the rear of the trans to keep good drive shaft alignment. the uppers depending if you are going to triangulate or if you are running a pan hard bar. but if you triangulate from the cross member at the rear of the cab to the center of the axle on top and the two links as close as you can get to one another. i have a 82 toyota 4x and i am linking the front. soon to be followed by the rear. make sure the lower links stay lower then the upper a triangle does not shift left and right so you dont need a pan hard bar

Reply #2 eric (99.241.183.76) - Tue Jul 29 19:26:51 2008

Help.I need a rear right axle for a 1982 toyota pick-up that came with a camper.Where could i find such a thing or would different year and model be compatable ?Thanks anyone.

Reply #3 Tommy White (74.244.55.198) - Thu Aug 7 21:19:13 2008

Eric,

There are a couple of web sites you can look.

1 Allprooffroad.com

2 marlincrawler.com

Your best bet maybe just looking at ever junk yard in your area.

Reply #4 chris (209.151.116.147) - Mon Sep 22 20:46:55 2008

I have a 89 toyota pickup and I need 2 know where i could get a straight axle 4 it.

Reply #5 justin (76.97.116.184) - Mon Dec 1 10:38:08 2008

i have a 1985 toyota 4x4, its straight axle looks and runs good. I have a rear end with 529 gears and detroit lockers, and another front end that straight axle i need to sell i dont have time to finish it. i have a bunch more parts i have about 4, 000 in make me an offer

Reply #6 windsor exports (122.162.99.247) - Wed Dec 3 01:26:41 2008

Manufacturer and Supplier of Hex Bolts, Hexagonal Nut Bolts, Hexagonal Flange Bolt, Auto bolts, S.S Hexagonal Head Bolts, Hex Nut, Hex Head Bolts & Screws. We have wide range of Hex Head Bolts, S.S. Hex Bolt, Heavy Hex Bolts, S.S Hex Screws & Bolts, check nut, nylock nut, banjo bolt

Reply #7 roy orbeson (96.26.240.239) - Thu May 14 23:05:18 2009

has any one done a front 3 link on toyota straight axle using a GRADER BALL FROM A KAMATSU MOTOT GRADER? I read about this online not much info there.

Name:           
E-Mail:         

Optional (please add to our directory first)
Web Link:       
Link Title:     

Message: