Ford-Explorer Sport Trac - 2002 Ford Explorer Sport Trac Stuck In 4 Wheel High
John (71.241.112.45) - Sun Dec 14 11:59:10 2008
I have a 2002 Sport Trac stuck in 4 wheel high. This happened about a week ago. At that time I pulled all fuses ant they were good. I reinserted all fuses and problem solved. Last night, same problem occured. All fuses are still good. 4 WD light on dash is off, but vehicle is still in 4WD. I tried switching between 2WD and 4 WD while in neutral several times and also backing up with no luck. Any suggestions?Thanks, John
Reply #1 Rick (71.63.179.204) - Sun Dec 28 08:03:08 2008
Either the 4X4 control module Ford Part 1L54-7H417-AE or AC or AD dependent on your year and VIN in the kick panel on the passenger side is bad or most likely the motor that controls the shifting in the transfer case. There is an excellent HOW TO REPAIR thread in myexplorerforums. Or this TSB * TSB #041810 -- 4X4 NOT ENGAGING OR INTERMITTENT 4X4 ENGAGEMENT - VEHICLES BUILT PRIOR TO 4/1/2004. *TT (NHTSA ID #10013112, JANUARY 01 2004)
Reply #2 Bill (24.127.240.49) - Sun Aug 2 18:23:58 2009
My daughter's 2002 Sport Trac does not engage into 4High or 4Low. I have been told the control module is behind the kick panel and also on the transfer case. I have also been told it is behind the radio (center console). I have not found it anywhere. The dealer is even confused. Does anyone know where the selector module actuator is located? Thx! Bill
Reply #3 ryan (216.227.116.164) - Fri Oct 23 18:37:48 2009
i have a 2001 ford explorer sport trac that is stuck in 4x4 low and the speedo is out of wack. no codes and the 4x4 lights work but are not on. swapped a known good 4x4 switch still no disengaging. if any one can help please email me
Reply #4 brandi jones (65.125.140.43) - Mon Nov 16 10:13:34 2009
The same thing happened to me.... did you get any information about the problem? my email is foxracejones@gmail.com if anyone can help......i have a 2002 ford explorer sport trac that is stuck in 4x4 low and the speedo is out of wack. no codes and the 4x4 lights work but are not on. swapped a known good 4x4 switch still no disengaging.
| |