Bob Fryer (65.33.54.35) - Mon Dec 12 18:16:50 2005

In a 2002 Ford Explorer XLT, I am hearing a clicking noise coming out of the rear speaker. It doesn't affect anything, but is annoying. It doesn't cause the amp guage to fluctuate... it sounds like a relay is clicking, or something...? Any ideas what this could be?

Reply #1 sina (58.168.165.212) - Thu May 11 20:39:55 2006

hi.i've got ford fairmont dec94 and i want to chang the audio system but i couldn't find the correct wire.

Reply #2 shayne (70.69.168.171) - Mon Dec 18 22:49:12 2006

i have a 98 explorer and my rear tail light on the hatch is staying on when the truck and light's are all off it just flicker's all the time does anyone have suggestions?

Reply #3 Ed Maher (75.80.232.105) - Sun Mar 4 04:12:00 2007

I have a 2006 Ford Explorer six cylinder with three system failures that occurred at the same time. One is the fuel gauge, the second is the radio, third the power locks and finally, there is a Check Engine warning indicator that came on. If you have some knowledge of this problem please provide suggestions. All other on board systems are fully functional.

*760) 641-4308

Reply #4 Michael Dempsey (72.218.28.48) - Fri Oct 19 18:36:48 2007

My 2002 Ford Explorer Sport brake lights just went out. What could have caused it? I'm not sure what fuse would need to be looked at.

Mike

Reply #5 kerry (86.135.80.59) - Thu Dec 20 20:14:06 2007

hi,

i have just bought a ford explorer lpg converted and there is an orange engine shaped light on on the dash board, any ideas?

much appreciated,

kerry

Reply #6 Ken (68.230.141.207) - Fri Dec 28 16:00:15 2007

Where can I find a list of what fuses are for what in the fuse panel on the drivers side of the dashboard?

Reply #7 Peter (24.59.129.113) - Fri May 30 09:38:58 2008

I have a 02 Explorer and both accessory power outlets are not working. I have looked through the owners manual and can not identify the fuse. Is there an inline fuse, if there is, where is it located?

Reply #8 Larry Rice (68.81.137.107) - Mon Jun 16 19:46:47 2008

Getting a thumping noise from my rear A C unit , evan when A C or heat is turned off . Sounds like a "damper motor" is stuck ? 2002 Ford Explorer XLT 4by4 with 3rd row seat package . Can this rear unit be disabled ?

Reply #9 alvaro reyes (200.73.102.38) - Tue Jun 17 13:47:37 2008

Hi there: I wonder if someone can give me a hand. I have the check engine light ON, but when I plug the scaner it sems NO POWER on it. I think there is a problem whit the fuses, but all are ok. Any one can help me find the problem?

Thanks

Reply #10 carl (71.226.152.71) - Tue Jun 24 17:29:32 2008

sport trac 2001 I turn the key , i get nothing , in morning it start, cut it off, try to restart, nothing/ help 706-339-2418

Reply #11 michael m browder (4.90.52.22) - Sun Jul 6 20:20:46 2008

why does my vent blow hot air all the time

Reply #12 brian hulme (79.74.21.143) - Tue Aug 12 04:25:01 2008

my rear wiper will not work?

Reply #13 Daniel (99.184.158.153) - Wed Aug 20 14:15:07 2008

The exterior keypad will no longer open the driver's door. Can I fix this myself ? If so, where do I start ?

Reply #14 Mike (69.95.191.131) - Wed Sep 24 09:44:03 2008

96 Explorer, low beam lights not working, checked fuses&bulbs, there good. The left went first and now the right. the high beam work????????

Reply #15 Pete (68.9.249.128) - Sun Oct 5 13:03:05 2008

I have 2001 Ford Explorer and the 7.5A Brake Pedal Position Switch fuse keeps blowing preventing me from taking the car out of park. Please call or email me if you have a solution to this problem: 860-836-6987

Reply #16 Derek (75.71.56.33) - Mon Oct 6 21:50:50 2008

I would like to wire my Explorer Sport Trac for towing. I have no problem doing it myself, but I need help knowing where and how it hooks in at the fuse box. Answers?

Reply #17 Roger (24.130.118.12) - Sat Dec 6 21:54:35 2008

I have a 2002 Explorer where I think a fuse is blown. The driver side door is having a few electrical issues all of a sudden. The power locks do not work (on driver's side only), the mirror adjust does not work and the door ajar light stays one due to this door. I know the door ajar is related to the driver's side door because the key chime keeps going with the door closed.

Fuse #16 is ok.

Please help.

Reply #18 Jim (24.63.1.43) - Sat Dec 27 12:18:45 2008

Hi I have a 2002 ford explorer that has a thumping noise in the rear quater on the driver's side please email me if you have any answers to my problem

Reply #19 bailey (75.46.205.92) - Sun Jan 18 23:37:57 2009

I am trying to install a cd player for explorer 2002. I've run into factory wire connector but I don't know what each color . stands for, please anyone email me.

Reply #20 PETER BURGESS (91.109.83.195) - Wed Jan 21 05:31:45 2009

lights on my dash display are only half lit, is this a fuse problem or a bulb and how do Isolve it.

Reply #21 maximo mejia (190.80.203.23) - Sun Feb 8 19:38:22 2009

I have a ford explorer XLT 1997 and the ABS system light have myself crazy. Where can I get the electrical squematic wiring diagram for?

I change hidraulic pump, brake system controller, sensors. So I am getting to the point and almost sure that is a wiring problem. I need son help getting it.

Reply #22 brandi reeves (99.148.205.163) - Fri Feb 13 22:38:39 2009

my dash lights are only half lit, why? bulb or fuse? my left head light works, but my right head light won't even with a new bulb, is it a fuse problem? please let me know whats wrong, its for a 2000 ford explorer sport.

Reply #23 Earl (189.181.178.31) - Thu Mar 26 14:20:14 2009

Just started yesterday. Dash needles in cluster are jumping and the radio is powering up and then shutting off. If i am not moving, it is fine. Seems to only happen when im driving the car, hitting bumps, etc. I think its a short somewhere, but the battery isnt charging also...i think they are related. The voltage gauge in the cluster says normal. Please help.

Reply #24 Sarela (24.248.97.210) - Wed Apr 1 14:03:57 2009

Please help, my car has been towed 4 different times,

I took my car in for service at Ford of Orange ($485.00), they claim it could be the fuel pump($900.00est.), they also said my alarm is interfearing with my lights which may be the cause, they also wanted to remove my alarm system which they also installed.

Ford claims that it was an after market alarm installed in the vehicle. I don't understand. I bought the car at the dealership and the alarm was pre installed prior to it being sold...they also left the factory alarm installed which caused it to wrap itself around my steering wheel. I was lucky I was at home it would not move when I went to drive away the same day I purchased it.

Reply #25 BW (74.107.91.110) - Wed Apr 29 21:45:59 2009

I have a 2002 Explorer with climate control. The compressor clutch will not enagage. I have checked:

Clutch fuse

Tried setting the temp to 60 and pushing the AC button (light comes on)

Connecting a gauge to the low side-there is pressure

Turning the compressor-it is not locked up

Bridging the low and high side pressure switch

Bridging the switch connectors with a voltmeter-there is 14 volts across.

What to check next??

Reply #26 Luis Cadena (192.75.80.11) - Tue May 26 17:45:01 2009

I have a 2002 Ford Explorer Sport, 4x2. Rear left (driver) side stop and lane change light is not working, I have changed brake switch and light bulb but problem is still. I have reviewed fuses but they are OK. I think line is broken, but I would like to get an additional opinion for repair.

Thank you in advance and greetings from Mexico.

Reply #27 Kimberly Williams (216.212.250.72) - Fri Jul 10 20:33:04 2009

I HAVE A 2002 FORD EXPLORER AND RECENTLY THE POWER WINDOWS

STOPPED WORKING AND THE POWER LOCKS ARE STILL WORKING. I'M

THINKING THAT THE FUSE THAT OPERATES THE WINDOW IS OUT. WHEN I

PURCHASED THE TRUCK IT HAD NO OWNER'S MANUAL IN IT SO I HAVE NO

IDEA WHAT FUSE IS USED TO OPERATE THE WINDOWS. COULD YOU TELL

ME WHICH FUSE IS TO BE USED?

Reply #28 Wayne Barrilleaux (72.203.143.24) - Sat Jul 11 09:11:41 2009

I have a 2002 Ford Explorer XLT that keeps blowing the fuse for the driver side power seat and adjustable pedals. I replace 30A fuse and it might last 2weeks or 2days. Does anyone have a fix for this?

Reply #29 John (192.234.148.250) - Wed Jul 22 01:45:57 2009

I have a 2000 explorer and my night time running lights will not come on inside or out

Reply #30 Michael king (68.187.178.98) - Fri Jul 24 20:32:22 2009

I have a problem with the wiring harness on a 2006 Explorer

I have the tow harnesss that is connected and the parking lights will not come on my trailer. I checked and there is no voltage at the 4 prong plug. I traced the wires back to the right side under the bumper there is a plug that plugs into the factory harness. no voltage there. The brakes lights and the turn signals work on the trailer. The parking lights on the rear works. Does the voltage come from the rear tail light or is it a seperate harness going to the front. I probably could cut the brow wire and run it up to the parking light seperate and tie it in there. This is a factory install no after install.

any sugesstion

Thanks

Reply #31 Bruhoo1 (76.115.93.155) - Tue Jul 28 19:53:06 2009

My 1992 Explorer has been a very good vehicle. However, in the last year and a half if the car is not driven every day, the car radio will not come on until the car is driven a while. I've had the battery checked and it is OK. The car starts right up every time too. I have never seen a problem like this. Usually if there is a short it drains the battery and does not "fix itself" after being driven for 20-30 minutes!

Just in the last 2 weeks I drove it 160 miles to another airport and left it in a parking lot for 12 days. When I returned it started immediately, but the radio wouldn't work. After 30 minutes on the highway the radio came on!

Does anyone have any ideas?

Reply #32 jeff (97.95.153.48) - Tue Jul 28 20:52:44 2009

I HAVE A 1999 FORD EXPLORER WAS CHANGING HOOD AND IT CAME A DOWNPOUR AND NOW IT WONT START WAS RUNNING EXCELLENT UNTIL IT GOT SOAKED WHAT CAN I DO !!!!!! DONT HAVE FUSE DIAGRAM TO KNOW WHAT TO CHANGE OR DO YOUR HELP WOULD BE APPRECIATED

Reply #33 fred (72.172.205.189) - Tue Aug 4 12:49:14 2009

I have an 02 explorer that has no fuel pressure, i changed the fuel pump and still no pressure cant even hear the pump come on when u switch the key on. any help?

Reply #34 Zach (75.181.92.205) - Mon Aug 10 18:07:22 2009

I have an 03 Explorer that keeps blowing the starter fuse #29 under the dash. Everytime I go to crank the Explorer the fuse blows and I have to replace it. Any ideas what the problem is?

Reply #35 hugh shull (205.188.116.198) - Tue Aug 11 16:14:46 2009

i own a 2000 ford (purchased used): Explorer XLT SUV 4D, Engine 4.OL V6 EFI, assempled in U.S.--it is parked on the street in NYC and I have had both mirrors replaced multiple times--i believe the cars original mirrors may have been heated and with puddle lights--to save money i ordered a non-heated, on-puddle-light mirror online, intending to install the thing myself--it turns out that replacement mirror's plug doesn't mesh with the car's window wiring connection--the car cable has two black lines, two yellow lines, a greeish line and a lavender line, whereas the replacement window has three lines, one blue, one yellow and one red--is there any reasonable was I can simply splice those three wires with the appropriate three wires from the array of 6 in the car's system, tying off the unused wires with electrical tape; i.e., which color goes with which color--i am only interested in the automatic adjustment mechanism

Reply #36 DAVID (76.226.201.226) - Mon Aug 24 17:14:16 2009

anyone know where the inline fuse is located from battery to altenator???

Reply #37 Justine (70.95.189.192) - Thu Aug 27 17:14:25 2009

I wanted to know if anyone knows about a problem I'm having with my 1995 Ford Explorer Eddie Bauer 4 door. I put my car in park and turned the inginition off and took out the keys and the car is still running. I tried to put it in gear still wont shut off. I tried changing out the ignition switch but still the same problem the only way I can shut it off it by unpluging it under the hood. Anyone have any advise on this problem? Please help!!!!!

Reply #38 tim (97.217.32.116) - Mon Aug 31 21:20:44 2009

what is involved in installing a brake controller on a 2002 ford exployer for a camper. Also needed will be a 7 prong adapter, I only have 4.

Reply #39 Spencer (71.221.164.200) - Tue Sep 1 10:21:19 2009

I have a '96 Explorer and the low beams are not working. The high beams work just fine. Anybody have any advice on what the problem is and how to fix it?

Reply #40 Steve Cupp (70.255.21.4) - Fri Sep 18 14:49:53 2009

Where is the relay between the 4 wheel drive buttons and the 4 wheel drive motor located on the transfer case?

Reply #41 Doug Atkinson (98.246.79.68) - Thu Sep 24 13:25:54 2009

I have a 2002 Explorer that goes into 4 wheel drive low by itself. When the vehicle is cold in the morning it will go into 4 low and won't come out.

Reply #42 linda (24.236.39.102) - Fri Oct 9 10:43:56 2009

i have a 98 explorer and my rear tail light on the hatch is staying on when the truck and light's are all off it just flicker's all the time does anyone have suggestions?

Reply #43 linda (24.236.39.102) - Fri Oct 9 10:45:40 2009

I need to know where the fusible link is located on a 1998 for explorer

Reply #44 Mona Huyghen (207.200.116.131) - Fri Oct 9 13:01:25 2009

We are having a hard time finding an emergency brake controller for a 2000 Emplorer. Any help yhou can give us is appreciated. Correct part number, where, etc? Thank you

Reply #45 Mike Kulesza (99.147.223.16) - Sun Oct 18 14:02:33 2009

97 Explorer. left turn signal works fine until I step on the brake. Both front and rear tune lights come on and the dash indicator lights up steady. When brake is released it starts blinking again. Any ideas?

Reply #46 rob (98.125.232.140) - Fri Oct 23 23:16:54 2009

I have an Ford Exploer XLT 1992. Out of the blue it will drain power from the main system when it is put in R, D, or any other engaged gear. Not P or N. From 12v to 6, 7 or 8v. This only started recently and I can't think why.. Got an idea?

Reply #47 Chris Collins (64.40.60.233) - Fri Oct 30 21:39:32 2009

96 explorer, The power windows, moonroof and alarms: don't work

I need help locateing the physical part "Generic Electronic Module" The electronic module for the distribor is the wrong part. Any Help at all is greatly appriciated!!!

Reply #48 brian z (24.127.218.203) - Fri Nov 6 11:25:43 2009

my parking lights will not shut off unless i pull out the fuse thought it was the switch so pulled that but they stayed on any ideas

Name:           
E-Mail:         

Optional (please add to our directory first)
Web Link:       
Link Title:     

Message: