ANDREW (76.121.116.182) - Wed Mar 11 19:31:05 2009

I HAVE A 2006 DODGE DURANGO SLT.

MY FRONT HEATER BLOWER STOPED WORKING. I PURCHASED A NEW ONE AND IT WILL NOT WORK EITHER. I CHECKED VOLTAGE AND THE BLUE AND WHITE AND BLUE WIRE HAVE VOLTAGE THEN I GROUNDED THE SCREW ON THE BLOWER MOTOR AND THEY BOTH WORK BUT WILL NOT SHUT OFF. I UNDERSTAND ITS A GROUND PROBLEM BUT HOW CAN I FIX THIS TO MAKE IT WORK RIGHT

ANY HELP WOULD BE APRICIATED

Reply #1 Jeff (12.236.143.34) - Thu Mar 19 08:03:36 2009

A quick question...is the blower totally inoperable or will it run at the highest speed? I ask this because on the inside of the vehicle, mounted on the blower ducting, there is a speed resistor. When the resistor goes bad the blower will only run in high speed. I had a similar problem several years ago on my Durango. Resistor is under $20 and relatively easy to replace.

Hope this helps. - Jeff

Reply #2 Chris (12.173.207.194) - Thu Mar 19 11:22:04 2009

I have a 2006 Durango and the blower went on it, had it replaced, approx. $300 going to pick it up now. Am requesting old motor to review/inspect. I find it hard to believe the motor would go?

Reply #3 matt (64.222.130.171) - Sun Aug 9 12:06:20 2009

06 durango ac is charged no leaks but still not blow cold seem, s like the heat is not shuting all the way off

Reply #4 matt (64.222.130.171) - Sun Aug 9 12:09:42 2009

06 durango ac is charged no leaks but still not blow cold seem, s like the heat is not shuting all the way off

Name:           
E-Mail:         

Optional (please add to our directory first)
Web Link:       
Link Title:     

Message: