Chrysler-Sebring -
Will not turn over
bandit (67.43.65.39) - Fri Dec 28 21:30:29 2007
I have a 98 Seabring Jxi Convert. and I have a similar problem as above. Car will not turn over however everything works and is fully charged, but turn the key and all idiot lights come on but will not turn over. Any ideas??
Reply #1 Cindy (97.73.64.173) - Mon Aug 4 00:36:49 2008
I have this same problem has anybody come up with a solution? Night before car ran fine next day won't start. Charged bat. just in case, no not it. Tried to jump. No clicks or anything. Idiot lights come on but no sound. Not sure what to do next. or how to do it.To far out in county to get it to a shop. What can I try?
Reply #2 robert (76.244.153.31) - Sat Aug 9 14:48:27 2008
just put knew plugs and wires on car and a moduler and now my96 cseb will not turn over
Reply #3 robert (76.244.153.31) - Sat Aug 9 14:51:11 2008
i just put new plungs wires and a new moduler on my 96 chrysler sebring and it will not turn over
Reply #4 Ray (70.236.32.28) - Tue Oct 28 03:23:54 2008
I replaced ignitiom coil thought it was bad but its not.....the igntion coil isnt throwing spark to the plugs to fire........ everything elese works just wont start......it ran fine two days ago ...would not start the next mourning.......Please Help..... im going broke by guesing whats wrong..........
Reply #5 j jenry (199.41.197.24) - Fri Nov 21 22:48:11 2008
car wont start turn key and hold in start position car should eventualy start.Hold in start position for 15 secounds fix no permanent but car will start.
Reply #6 chelea26 (222.127.111.234) - Sat Nov 22 03:35:03 2008
is battery fine? or possibly a starter problem
Reply #7 Jean (24.175.212.92) - Mon Dec 15 18:20:52 2008
Well my husband had that problem of the car not starting. He tried getting a jump but that also did not help. Someone at his work mentioned a fuse. I had no idea that a fuse would prevent a car from starting, yet it did. He switched it out with another fuse and it turned right on. He bought another fuse to replace the blown out one and it has happened again. Where the car will not start and the fuse is blown again. He does not know exactly what fuse it is for as we do not have a diagram anywhere to tell us. Hope this helps someone.
Reply #8 elsie (74.76.10.175) - Sun Jun 14 23:09:31 2009
had the same problem with my 97 sebring not turning over. my mechanic checked it out for a few days then said my distributor was why it wasnt working. he fixed that and now shes running...but also check the crank sensor that might be another reason why. but those two i would check if i was you.
Reply #9 mark (67.180.171.157) - Sat Sep 26 13:44:08 2009
2005 chrysler sebring conv. 2.7 v6, wife driving the car died in the street. got a jump drove it home now it will not start at all. took the batter out tested ok. when not jumped, turn the key and everything goes dead. any suggestion?mark
Reply #10 Askia (198.110.88.211) - Tue Oct 20 10:09:17 2009
I'm having the same problems as everyone else with my 95 chrysler sebring...Driving one day, then the next morning nothing...No sounds or anything.....I see this is the LAST chrylser I will ever purchase...
Reply #11 Damien (24.57.70.41) - Sat Oct 24 22:07:01 2009
own a 98 sebring convertible, runs great except sometimes it won't turn over. Let it sit for an hour and it starts right up. Will run for a few days then won't turn over again. What gives?
| 
