Chevrolet-S10 Pickup -
engine swap
Wayne (66.19.76.102) - Mon Nov 24 19:34:49 2008
I have a 2001 S10 with a 2.2 liter engine. Can I replace this engine with a 2.2 out of a cavilier car? I would have to swap the exhaust and intake but would it all match up? Anyone done this before? Thanks ahead of time.
Reply #1 jeromi (24.177.51.14) - Thu Nov 27 00:16:07 2008
yes you can, but it would be easier for you to put a cobalt ss motor in it. there is a lot to do regardles unless its the same engine you are swaping out. i have a 99 sonoma that has a 2.2l ecotech in it. plus i put a k50 STI turbo just before the catalytic converter. the truck runs 9.65 @186mph.
Reply #2 frank luciano (97.101.136.236) - Sat Feb 7 13:30:01 2009
I have a 1997 sonoma and would like to put another motor in. so my question is what else will fit into my truck easily like mount right up
Reply #3 Amanda (208.100.228.248) - Wed Feb 18 08:47:34 2009
Does anyone know where I can get a 6cyl 2.8 engine for a 92 chevy s10 for under $400.00?
Reply #4 Tim Conway (97.83.233.250) - Sat Feb 21 19:20:16 2009
I've got a 1986 Chevrolet S10 engine.
Reply #5 eric betzler (98.222.201.230) - Sun Mar 29 17:23:02 2009
I have A '94 s-10 with a 4.3 v6 vortec trottlebody and would like to swap it out with a 4.3 v6 vortec fuel injected engine we pulled from a '95 s-10 ss. I have the computer that came with the fuel injected engine. Is this all I need to make this work?
Reply #6 ttiffany (67.169.219.107) - Sat Jun 6 23:32:45 2009
cheepest place to get engines for chevy s10 tahoe's?
Reply #7 JIM (207.200.116.131) - Tue Jun 9 21:50:19 2009
Can I SWAP A AUTO-TRANS FROM A 2.2 2000 SONOMA TO A 1996 S-10
Reply #8 Bob (4.158.198.227) - Mon Jun 15 20:34:47 2009
I just did an engine install in a 1997 S10 4 cyl with a manual 5 speed. I have a V shaped bracket left over. It is about 5 inches on one side and 4 inches on the other. It is made out of round steel and flattened in 3 places for mounting it to something. What and where. I took it apart about 8 months ago and my memory is only good for about 4.Bob
Reply #9 Travis (70.149.106.99) - Wed Jun 24 23:55:19 2009
I have a 1.9L 1999 Chevy S10 LS. Can I replace the engine with a rebuilt cavalier engine? If it is possible what problems may I expect to run into as far as modifications/adapters?
Reply #10 Tony (74.129.131.54) - Fri Aug 7 16:07:22 2009
I'm wondering if I can use a better engine other than standard for this model.
Reply #11 dee (69.207.57.217) - Thu Sep 17 11:43:04 2009
i would like to know if i could put a cobalt ss engine in my 97 s10 the s10 have the 2.2 in it 5 speed....does the comp in the truck work for the cobalt engine....does the tranny bolt up to the engine please let me know thank u
Reply #12 Zuhar (72.185.237.87) - Sun Sep 20 00:19:33 2009
Why re-engineer an S-10? Buy one with a 4.3 to begin with and drive it instead of working on it every night and scouring the planet for parts.
Reply #13 Lionel Taylor (24.95.254.92) - Mon Sep 21 11:43:33 2009
Have any one ever transplanted Z24 Cavalier engine to a chevy S10.
Reply #14 nate (64.27.238.244) - Thu Oct 1 16:59:53 2009
I have a chevy s10 blazer 4x4 and i want to swap my 4.3L vortec engine for a 350 5.7L small block.. How hard is it to do? I also need a transmission to fit , but my main question is will i have to get a new rear end or will it match up?
Reply #15 MIKE (64.231.138.167) - Sat Oct 3 16:38:02 2009
I have a chevy s10 4x4 and i want to swap my 4.3L W SERIES vortec engine for a 350 5.7L small block.. How hard is it to do? I also need a transmission to fit , MANUAL TRANS 5 SPEED IN IT NOW
Reply #16 Akki (74.194.78.55) - Thu Oct 8 08:33:35 2009
Looking for a used running 2.2L for a Sonoma/S-10. If anyone has one please e-mail me!! Need one NOW
Reply #17 chuck (24.18.19.86) - Wed Oct 14 14:09:02 2009
I have a 94 s10, the 2.2 engine is shot. A friend has a 2.8 s-10. will it bolt up to my 2.2 5 speed tranny? Or what do I need to do.
Reply #18 Russ (74.248.207.225) - Thu Oct 15 21:24:36 2009
Will a 2008 s10 4.3 swap into my 2002 s10 extreme? If so what modifications will I have to make? If not, what years will work?
Reply #19 Nathaniel (76.112.113.176) - Sat Oct 24 10:35:22 2009
I've got a 1999 chevy s10 extreme with a 4.3 vortec in it. Looking to drop a 5.7 TBI V8 for a 95-96 chevy conversion van in it. Is there anyone that knows where I can get a pre-made electrical harness for this so I don't have to scab something together? Thanks!
Reply #20 monE (70.78.144.54) - Fri Nov 6 12:51:09 2009
is it possible to replace the 4.6 out of a chevy s10 extreme with a 89 chevy 350 small block
| 
