Dale Bokros (132.33.132.19) - Thu Jun 26 13:58:20 2008

I need to find out what powers up the air conditioning compressor? The high/low pressure switches both have power, and are working properly. The diode has been checked for resistance one way.

Reply #1 Shaun Navin (71.233.49.0) - Thu Mar 12 11:14:07 2009

I need an electrical schematic for a 1996 chevy s-10 pickup. My reverse lights dont work and I know the bulbs are good and the fuse is good but they don't come on when I shift into reverse. Truck is 5 spd 4 cyl.

Thanks.

Reply #2 Craig Chaney (173.22.24.164) - Thu Apr 23 19:50:26 2009

Turn on headlights, turning signals and brake lights quit working. Take key out and the turning still work.

Reply #3 sam101 (66.169.139.193) - Tue May 19 14:55:04 2009

my emergency lights work blink and everything but my turn signals do not, i already replaced the trun signal swich and still nothing.....

Reply #4 keven (64.136.27.230) - Wed Jun 3 18:34:43 2009

my ignition wire to my stater came up missing doing an engine

swap.i paid someone to finish for me. thats when my wire came

up missing.i had no power any were.i managed to get my ignition lites on the dash to come on but the stater would

not ingage i wired the starter to a push button i wired

my lights from my battery to the switch but still get no spark

to my plugs i need help in a bad way. if i dont get this truck

running today i will be evictited tommorw please help me.

1991 chevy s10 thank you very much if you can help me

Reply #5 sandi (66.190.48.58) - Fri Jul 24 17:04:56 2009

When I turn on my high beam headlights, they and all head lights go out. Then the inside lights start flickering. All this time all other lights are on, but are flickering also.

Could this be the ground wire for the headlights? If so where is that found?

My car is a 1996 Chevy Blazer - Thank You!

Reply #6 Brad (24.112.150.16) - Sat Jul 25 22:35:27 2009

I need a schematic on the exterior lighting and wiring of the center high mount stop light. It isnt working and I can't figure out why. I need to know where to look for problems.

Reply #7 Brad (24.112.150.16) - Sat Jul 25 22:36:43 2009

BTW, the vehicle is a 1995 Chevrolet S10 4.3L 4x4

Reply #8 Brad (24.112.150.16) - Sat Jul 25 22:36:58 2009

BTW, the vehicle is a 1995 Chevrolet S10 4.3L 4x4

Reply #9 me (24.112.150.16) - Sat Jul 25 22:37:11 2009

BTW, the vehicle is a 1995 Chevrolet S10 4.3L 4x4

Reply #10 me (24.112.150.16) - Sat Jul 25 22:37:46 2009

BTW, the vehicle is a 1995 Chevrolet S10 4.3L 4x4. and also e-mail me with the gmail account please :)

Reply #11 Richard Aller (71.187.118.122) - Wed Sep 9 19:01:11 2009

I need to find the IAT signal ports so i can add a power chip on a 2005 chevy 1500 pu

Name:           
E-Mail:         

Optional (please add to our directory first)
Web Link:       
Link Title:     

Message: